eapol status

Syntax

• default eapol port {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]} status

• eapol port {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]} status authorized

• eapol port {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]} status auto

• eapol status {authorized|auto}

• no eapol port {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]} status

Command Parameters

authorized

Specifies the port is always authorized.

auto

Specifies that port authorization depends on the results of the EAPoL authentication by the RADIUS server.

port {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]}

Identifies the slot and port in one of the following formats:

• a single slot and port (slot/port)

• a range of slots and ports (slot/port-slot/port)

• a series of slots and ports (slot/port,slot/port,slot/port)

• all ports on the same slot (slot/all)

• all ports on the switch (all)

If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.

Default

None

Command Mode

GigabitEthernet Interface Configuration